Arduino Automatic Fan

In this blog, we will guide you through creating a temperature-controlled fan using an Arduino board. With just a few electronic components and a little bit of coding, you can have a fan that activates when the temperature starts to rise, providing a cost-effective and efficient solution. Supplies. Arduino uno. DHT11.

A voltage regulator is used to convert the 12V to 5V for all the sensors and Arduino. Working Concept of the Automatic Fan. The working concept of the automatic fan consists of three things sensing, sending the signals, and actuation. Two different processes are happening at the same time so let us understand both of them separately.

The circuit connections of Temperature Based Automatic Fan Speed Controller using Arduino is very easy. Here 162 I2C LCD is directly interfaced to Arduino using A4 and A5 pins. LCD is used for displaying temperature and Fan speed Status. The DHT22 sensor module is connected to the D12 pin of Arduino.

Working of Automatic Fan. In this Arduino based project, we are going to control DC fan speed according to the room temperature and show these parameter changes on a 16x2 LCD display. It is accomplished by the data communications between Arduino, LCD, DHT11 sensor Module and DC fan that is controlled by using PWM.

Try out my automatic fan results may very Automatic Fan to cool your room. Environmental Sensing. Components and supplies. 1. Arduino Uno Rev3. 1. 5v dc motors. 1. DHT11 sensor. 6. M-M Jumper wires. 1. L293D driver. 1. Breadboard - 830 contacts. 1. USB 2.0 Cable Type AB. 3. M-F Jumper Wires. 1. 9V Battery with clip. 1. Breadboard power

The Temperature based Automatic fan speed control system is a very easy and compact project, few components are needed to build this project. The key components of this project are Arduino, DHT11 temperature sensor, BD139 Transistor, 12V DC Fan, OLED Display, and LEDs. In this way, Arduino controls the fan speed with the changes in temperature.

Steps To Make An Automatic Fan With Arduino. Step 1 Firstly, we have organized all the components on TinkerCad digital board. DC Motor Step 2 Connect one terminal of the DC motor to the GND pin of the Arduino. And connect the fan to the DC motor. Step 3 Connect the second terminal of the DC motor to the 10-number pin of the Arduino. PIR Sensor Step 4 Connect the Power terminal of the PIR

DIY Fan Automatic ON and OFF using Arduino, Relay AND Temperature Sensor Jay Prakash Mandal September 14, 2020 . Are we really worried about our home electrical bill due to the unnecessary consumption of electricity by fan, here is the best solution to it. Often in summer days, we use a fan to make our room temperature falls to 25-26 degree

A temperature-controlled fan can help regulate temperature efficiently, providing automatic cooling when necessary. In this tutorial, we will guide you through building a temperature-controlled fan using an Arduino, a DHT11 temperature and humidity sensor, and a DC fan. This project is a great way to understand temperature regulation and can be

Description Temperature controlled Fan or Room Cooler using Arduino- In this project, you will learn how to make your own Fan, room cooler, ceiling fan or exhaust fan automatic temperature controller using Arduino, DHT11 temperature and humidity sensor, and a relay module.The Room Cooler or Fan is controlled automatically depending on the room temperature.