Arduino Display Case Design

This case is for the Arduino R1 Giga board, Giga Display Shield, and the GPIO screw terminal blocks. The display uses 4 M3 x 10mm screws for the faceplate, 2 M3 x 16 screws for the stand and 2 M3 brass inserts for the case back. This used TPU for the antenna mount and the washers. You will need an M3 tap to make the threads in the back cover.

3D design Custom OLED Display Arduino Nano V3 Case created by mattiW2L42 with Tinkercad

this is a case for your Arduino Uno R3 coupled with an LCD display perfect for hobbyists and professionals alike. This enclosure not only protects your Arduino Uno and LCD screen but also provides a simple appearance to your project. Ideal for educational purposes, DIY projects, or any Arduino-based prototype requiring a neat and accessible setup.

I created an enclosure for an arduino lcd display keypad and an arduino uno. There is also enough space to add some extra electronics space varies depending on the backside you use.button.stl needs to be printed 5x, you might choose different colors. Also don't forget to add the spacers.mount hole distances on the backside are 30mm and 40mm.

My aim was to design a professional looking case that is easy to print, can be customised to fit any requirements and contains only standard components.The temperature sensor is thermally decoupled from the case.3D printed optimised housing without supportCentred push-button panel with defined pressure pointEnough space for your own extensionsArduino Nano with USB-C on the backStandard circuit

About this item . 360-Degree Rotatable Design Effortlessly rotate and tilt the case at any angle for optimal viewing and accessibility. Versatile Compatibility Specifically designed for use with both Arduino GIGA WiFi and Arduino GIGA Display, offering seamless integration for various applications.

Highlights 360-Degree Rotatable Design Effortlessly rotate and tilt the case at any angle for optimal viewing and accessibility. Robust Construction Aluminum case and steel stand. Assembly Instruction KKSB Arduino Giga Display Shield Case With Adjustable Stand DE-7350001161693-USER_MANUAL_AND_SAFETY_DATASHEET.pdf

If you don't want the rest of the contents of the enclosure to view, you could use paint or adhesive vinyl on the inside of the lid to mask off all but the section where the display is mounted. PaulRB May 24, 2020, 759pm

This is a simple case made for the Arduino Giga display. The base attaches to the case via an M4x20mm bolt and an M4 nut. The actual Giga display is attached to the case via 4 m2x5mm can use 10mm. Note that you must use washers on each screw to ensure the case is properly held in place by the screws.

This is a case for an Arduino Uno together with an alphanumeric 16x2 LCD and simple keypad shield. A 9V battery and a switch can optionally be include. An example application for this design is a portable weight display, consisting of the Uno and LCD shield, a battery, a switch, and one or two HX711 cards interfacing to strain gauges.