Digi Web Interface

HOW TO Access the Web Interface on the Digi ConnectPort X2e Smart Energy gateways. HOW TO Access the Web Interface on the Digi ConnectPort X2e Smart Energy gateways. By pressing the small reset button on the top of the unit, the web interface will be made temporarily available for 5 minutes. Navigate to the IP address of the unit before the

Make sure Digi Navigator is installed and the IX15 is powered and connected to your local network or computer with an Ethernet cable. Launch the Digi Navigator. From the list of devices shown in the Digi Navigator, expand the device you want to access. Click Open next to the IP address you want to use. The login screen for the web UI launches.

Using the local web interface. To connect to the EX15 local Web UI. Use an Ethernet cable to connect the EX15 's 1PoE port to a laptop or PC. Open a browser and go to 192.168.2.1. Log into the device using a configured user name and password.

Sign in to the web interface. After you successfully assign an IP address to your device, you can sign in to the device's web interface using either of the following Web browser Digi Device Discovery utility

DiG Web Interface Tips By holding the cursor over an option, you will get an explanation of the usage. Clicking on a hostname in the output will add it to the hostnames list. Clicking on a nameserver will add it to the quotSpecifyquot list. DiG Web Interface Fair usage policy This DiG Web Interface tool is not intended for automated lookups.

Note Not all configuration options provided by the command-line interface CLI appears in the web interface. If you need to configure more advanced options, see the Accessing the command-line interface for instructions on accessing the CLI.

Extensive web interface to dig for doing online dns lookup nameserver query. Hostnames or IP addresses Type Options Show command Colorize output Stats This online interface to dig was created by Martin Holk Rasmussen. I welcome your comments and suggestions!

The ''Check for Digi Connect Updates'' utility is unable to connect to the Digi update server. ConnectPort TS 816 and MEI POST update requirement for older hardware How do I update firmware on Digi ConnectPort TS using the web interface. HOW TO Pointing the Connectport TS to the Digi Remote Manager. RomPager - Evaluation of Security

The most common way of doing so is through the Digi device's local web UI. Connect to the device using the default gateway IP address 192.168.210.1. Users can access the command line interface of a Digi device using an SSH connection, telnet connection, or serial connection. External software, such as a Linux terminal, PuTTY, or TeraTerm

Extensive web interface to dig for doing online dns lookup nameserver query. Hostnames or IP addresses Type Options Show command Colorize output Stats Request NS ID Trace Sort