Esp32 S3 Vs Esp32

Note 1 Reduced chip area compared with ESP32. Note 2 Reduced chip area compared with ESP32 and ESP32-S2. Note 3 Die size ESP32-C3 lt ESP32-S2 lt ESP32-S3 lt ESP32. Related Documents ESP32 Datasheet PDF ESP32-PICO Datasheets PDF

This article provides brief information on the difference between the ESP32 s3 vs ESP32 boards. Overview of ESP32 S3 and ESP32 Boards. The ESP32-S3 board is a dual-core XTensa LX7 microcontroller unit that runs at 240 MHz. This board has internal SRAM -512 KB, integrated 2.4 GHz, Bluetooth 5 LE amp 802.11 bgn Wi-Fi connectivity for providing

The ESP32-S3 chip is equipped with an Xtensa 32-bit LX7 dual-core processor clocked at up to 240 MHz, supports 2.4 GHz Wi-Fi and Bluetooth 5 LE, and boasts AI instructions, as well as a reliable security encryption engine, specially built for the AIoT market. Modules based on the ESP32-S3 processor

ESP32-S3 is Espressif's first SoC that supports AI acceleration. It can use vector instructions through the ESP-DSP and ESP-NN libraries to achieve high-performance image recognition, voice wake-up and recognition applications. ESP32-P series The ESP32-P series is a new series released by Espressif in 2024. This series currently includes

ESP32-S3 has lower power consumption in active mode 70mA vs 90mA for ESP32 at 160MHz. ESP32-S3 also has significantly lower power in light sleep mode 0.8mA vs 5mA for ESP32. Supported supply voltage range is 2.3V to 3.6V for ESP32-S3 vs 2.2V to 3.6V for ESP32. So for low power applications, the ESP32-S3 would be the better choice over ESP32.

ESP32-S3 vs. ESP32 Pricing. The ESP32 delivers strong value for basic IoT applications, while the ESP32-S3 commands a higher price due to its added support for AI, dual-band Wi-Fi, and advanced security. The table below outlines how each chip aligns with different project goals and budgets.

The ESP32-S3's GPIO general purpose input and output ports do not natively support 5V voltage. They are designed to safely withstand input voltages up to 3.3V only. If you need to connect the ESP32-S3 to a 5V logic-level device, you will need to use a logic-level converter to avoid damaging your device.

ESP32 ESP32-S2 ESP32-S3 ESP32-C3 ESP32-C6 Announcement Date 2014, August 2016, September 2019, September 2020, December 2020, November 2021, April Main processor Tensilica L106 32-bit up to 160MHz Tensilica Xtensa 32-bit LX6 up to 240MHz optionally dual core Tensilica Xtensa 32-bit LX7 up to 240MHz Tensilica Xtensa 32-bit LX7

I havent been able to verify if the s3 with USB OTG, has full USB-Host capabilities, as is not clear if the board can provide 5V power to small devices via the USB C port. There is a dev board with even 2 usb ports and there is a hack to quotroutequot power from some buses to the OTG port

ESP32-S3 vs ESP32-C3 - Performance vs. Efficiency . The ESP32-S3 is a dual-core Xtensa LX7 chip, while the ESP32-C3 features a single-core RISC-V processor, designed for efficiency and security.The ESP32-S3 has more GPIOs and higher processing power, making it ideal for AI and GUI-based applications, while the ESP32-C3 is smaller 44 mm and lower power, making it great for compact