Esp32 Water Meter Cardboad

ESP32 even has the capability to run machine-vision software to decode the dials on your meter, and parse them into data that home assistant can understand. But if you're like me and want a much simpler way to achieve this with reasonable accuracy and low cost, please read on! esphome name water-meter friendly_name Water Meter min

In this project, the water meter is regularly photographed with a camera. The captured photo will be sent to a server and processed using image processing techniques to obtain the numerical value shown on the meter. When a top-up is made to the prepaid meter, the usage amount will be deducted from the loaded amount to prevent unwanted water cuts.

ESPHome is a system to control your ESP8266ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems like Home Assistant. ESPHome is amazing, it's extremely powerful, easy and, more important very stable. For the water meter we're going to track hourly, daily, monthly and yearly. Create

In addition to special add-on radio modules, the quotAI-on-the-edge-devicequot project proves that non-digital water meters can also be read using a camera. In the project, an ESP32 cam is mounted directly above the water meter. The microcontroller periodically takes a photo and recognizes the current meter reading on it using customized text

We have designed an IoT based water flow meter. It is powered by the ESP32-S3 SoC from Espressif. We have used an ESP32-S3 Wroom 1 module for the project which will be much easier to handle when assembling the PCB. the device itself is battery powered and the custom PCB contains the necessary battery charging circuitry to recharge the internal battery.

The Wi-Fi connection made through the ESP32 TTGO T7 works excellent, though I must admit that my water meter device is close to the access point. Of course, there is always room for improvements. This Arduino sketch is made for a Smart Water Meter and produced by Pierre Pennings, springtime 2022 The waterflow is measured bu means

This project demonstrates edge computing using the ESP32, a low-cost, AI-capable device, to digitize your analog meterswhether water, gas, or electricity. With affordable hardware and simple instructions, you can turn any standard meter into a smart device. Let's explore how to make AI on the Edge a reality!

It works for water meter, as well as power or gas meters. In the second version it is an easy to use all-in-one device with a graphical user and administration interface. The working principle is still bases on a very cheap ESP32-CAM modul, which takes a picture that is digitizes by neural network support. 1599501402502-29bcd786-9496-4509

Creating a water meter using an ESP32 microcontroller can be a useful project for monitoring water consumption. Below is a basic outline of the steps you might take to build an ESP32-based water meter. Keep in mind that the specifics of your project may vary based on the type of water meter, sensor, and additional features you want to incorporate.

The wire can then be run from the water meter to inside and into the ESP32. Software The attached Arduino sketch can be uploaded to the board with the Arduino IDE , after following the DFRobot instructions to install the Beetle board .