Protogen Led Matrix

Here is the new Delta Protogen - a much smoother boi than the last! Included here is everything you need to make one with either MAX7219 square matrices single color version, P3 HUB75 panels, or even manufacture your own LED board with the included design files for a better fit full color panel! Included are all of the STL files pre-oriented, split, and ready for printing.

The LED Matrix. The LED matrix is basically a grid of LED lights that can be programmed to display any pattern. Normally it's coded to light up to show the Protogen's expression. There's no one single way of doing this. The Kaiborg Frame requires 6 LED panels of different sizes. Two for the mouth, two for the eyes, and two for the nostrils

Protogen Face Simulator. Welcome to the Protogen Face Simulator! Follow the instructions below to create and interact with your Protogen face Draw on the Canvas Click on the LED matrix panels to toggle the LEDs on and off. Clear the Panels Click the Clear button to reset all the panels. Export Configuration Click the Export button to generate the Arduino code for the current configuration

This is a LED control program for protogen helmets to be used with MAX7219 LED matrixes and ESP32 dev boards. Note that this is a pre-release with some bugs, unfinished code and a major lack of documentation. Use at your own risk.

This is a kit of the parts needed to make the animated LED eyes, mouth and nostrils for a Protogen fursuit head. Blue LED Colour The Kit includes 6 of the MAX 7219 single matrix displays 2 of the MAX7219 quad matrix displays 1 of CH340G Arduino Nano V3 1 of USB power cable 5 meters of wire , 1m of.

I am releasing the code and wiring diagram i used for the breathing nose animation on my Protogen head so anyone can use and modify it. Please give me credit though The code is written for an arduino R3 and the led matrix i used was an 8x8 matrix from an elego arduino kit. Here is the code. Pins Fill in the pins you used on your own setup.

Protogen 8x8 LED Matrix Inner Frame for Zillion Head. drwatson6. December 24, 2022. 10 58 4. Download all files. Post a make Collect Watch Report thing Tip designer Share. I made this so it can hold four 8x8 LED matrices for half the mouth, two 8x8 LED matrices for one set of eyes and one 8x8 matrix for a nostril. That's 14 8x8 matrices in

If your matrix doesn't have the same number A0-A1-A2 you can change it at the begging of the code. If your matrix aren't in same sens as mine, you can change the expressions in the document. 1 mean LED on 0 mean LED off. If you use bluetooth, the card is in sleep mode so you need to wake it up before give it an instruction.

The 32x8 strips are normally socketed. Those single 8x8 ones appear to have the matrix directly soldered to the circuit board so you can't swap the modules out to change the colour without a lot of delicate soldering work.

I use Jting-F for the 3D printed parts on the Protogen along with the visor because I do not currently own a 3D printer. If Jting-F is unavailable I could use Kaiborg Studios instead or whatever is preferred. I'm planning to implement ProtoTracer into my next Protogen using LED matrix panels. This would allow for much better Protogen face