Intermediate Word Of The Day Fast WordReference Word Of The Day

About Fast Running

A clock that runs quickly still works fine it just needs a simple adjustment. Fixing a clock that runs too fast can be as easy as turning a screw. Clocks with an interior or exterior pendulum have adjustment screws either on the pendulum or through a hole in the top of the clock. It may take up to two weeks to properly set a clock that runs fast.

These clocks have a balance wheel like a mechanical watch does. If there isn't enough power pushing the wheel back and forth, the wheel will not turn very far. It won't take as long as it should to come back around, and the clock will run very fast. Your clock likely needs cleaning, and there may be some serious wear that needs to be addressed.

Any sign of a fast running clock means it's time for new batteries. Why does my self-setting radio clock still run fast? If a radio-controlled atomic clock runs fast, it usually indicates a poor reception of the time calibration signal. Try relocating the clock to improve reception or moving it closer to a window.

Having a digital clock that runs fast can still work for you, but you must do a few adjustments. Handling a clock with such an issue could be simple as walking into the park. Possible Reasons for a Clock to Run Fast. A digital clock can run faster than usual for a variety of reasons. But these are the most common causes behind the issue

If the clock is running too fast, you may need to recalibrate the clock's oscillator. This can make the clock more accurate over time. 3. Check the Battery. If your clock is battery-operated and isn't working correctly, it may be because the battery is old or low on power. You can try replacing the battery to see if that fixes the problem.

I have a 19th century French mantel clock with a Japy Freres movement. It always runs 4-8 minutes per hour too fast. I have tried long and short pendulum lengths, light and heavy pendulums and the speed adjustor but every time it runs 4-8 minutes too fast every hour.

The clock was a hand made clock, I am not sure of the maker of the mechanics portion of the clock. Is there a name or number on it some place that I should be looking at. After running for about 2 hours last night the clock stopped, but not after gaining nearly 6-7 hours.

One of the most common reasons for a fast-running clock is temperature changes. Both quartz and mechanical clocks can be affected by extreme temperatures. In warmer conditions, the clock's components may expand slightly, causing the clock to run faster. Aging Components.

If the clock is a 611-200, the weights should be marked on the bottom as Left, Center and Right. If not, the heaviest weight should be placed on the right facing the clock. If the clock is running fast, it is most likely the pendulum and not the weights. Be sure to look at the lower diagram of the following page.

Check the clock against an accurate source like a cell phone or digital clock. After 24 hours make note of any discrepancy in the time. Stop the pendulum to move the pendulum bob up or down to change the pendulum's effective length. If the clock is running fast, move the bob down or turn the nut to the left.