Life Raft Launching

Liferaft Launching Procedure - Free download as PDF File .pdf, Text File .txt or read online for free. To launch a life raft, disconnect the hydrostatic release unit, attach the painter line, remove the pin, lower the release platform and ladder, throw the raft overboard, pull the painter to inflate it, use the ladder to get aboard, and cut the painter once onboard.

Launch your life raft in the water. Note Before launching your raft, position yourself as far as pos-sible on lee side wind in the back. 5. To inflate the liferaft, pull the painter out of the containervalise until red mark, then pull painter swiftly to activate the inflation system. 6. Once inflated the raft, you can be confronted with 2

Life rafts are much easier to launch than lifeboats. In emergencies, evacuation from the ship can be done without manually launching any of them, as the life rafts are designed with an auto-inflatable system. SOLAS Chapter III gives all the details for the types, and the number of life rafts to be carried according to the size and type of the ship.

6-Pull the painter with a hard jerk to fire the gas bottle to inflate the raft. 7-The life raft will take 20-30 sec to inflate. 8-Board the life raft one by one using ladder or rope. 9-Avoid sharp objects like knives, shoes and other sharp objects etc which may damage the raft surface.

Launching a life raft is a critical skill that can save lives in maritime emergencies. By understanding the procedures, conducting regular training, and prioritizing safety, crew members can ensure effective deployment of life rafts when needed. Always remember that preparation and practice are key to successful emergency response at sea.

Righting the life raft if the life raft opens upside down or capsized. Turn the life raft until facing the wind. Stand on the CO bottle and grab the righting strap. Lean back and pull the righting strap using own weight and wind When it start to fall back move away from the life raft.

There are 3 ways to launching a self inflating life raft.By Hydrostatic Release Unit, by manual and by davit.Here I will tell you details of launching procedures. 1. Manual Liferaft Launching Procedure. Check that one end of the painter of the raft is well secured to a strong point on ship's deck or structure.

Here's a step-by-step guide for launching a throw overboard liferaft Pre-Launch Preparation. Before launching a throw overboard liferaft, it is crucial to ensure that all crew members are accounted for and are wearing appropriate safety gear, including life jackets and immersion suits. The pre-launch checklist includes

New self-righting life rafts are a terrific design improvement. 3. Once the first person is aboard, carefully transfer the ditch bag to the life raft, then the rest of the crew. When you are considering a life raft, note how easy it is to enter through the canopy and how easy it is raise the canopy afterwards when jumping directly aboard.

Liferaft is easy to launch and during emergencies, the life raft inflates itself automatically as soon as it comes in contact with seawater. The life raft on board ship are released or launched into the water by three different methods 1 Auto release with Hydrostatic Release Unit HRU. 2 Manually launching. 3 Launching by Davits.